EUROTEC GROUPProfessional shooting-range solutionsLet's discuss your project ↘עברית
Indoor range with a blue SHIELDTAC ricosys PU floor and lane markings
SHIELDTAC · Rubber Ballistic Systems

KRAIBURG RELASTEC · MADE IN GERMANY

One complete environment.
Every detail considered.

Rubber systems for floors, walls and ceilings in shooting ranges and training centres. From surface planning to finishes, cleaning and maintenance, with a dedicated family of German-made solutions.

Explore the systems ↓Technical data & manufacturer documentsCatalogue in Hebrew ↗
Military & defencePolice & law enforcementSport shooting
Application from the manufacturer's gallery · ricosys PU

01 / THE COMPLETE PICTURE

For every area of the range,
a solution with a clear purpose.

The shooting-range floor, wall lining, ceiling and standing areas have different requirements. SHIELDTAC brings KRAIBURG Relastec's dedicated shooting-range solutions together under one brand.

The brand builds on the established SPORTEC shooting-product family. Names such as shooting and shooting SFR also appear in earlier documents. Here you can identify the current names, understand the differences and find the relevant document.

Developed and manufactured in Germany

KRAIBURG Relastec · Salzwedel, Germany

Manufacturer illustration showing application areas within a shooting range and training facility
A system view of the application areas · KRAIBURG Relastec illustration
01

A dedicated family of systems

Tiles, seamless PU systems, interlocking pavers, blocks and fragment-protection sheets.

02

Information for professional planning

Thicknesses, dimensions, reaction-to-fire classifications and test results by product and system configuration.

03

Designed for the full life cycle

Options for refurbishment, component replacement, finish repairs and routine cleaning in accordance with the manufacturer's instructions.

CHOOSE AN AREA

Start with the area.
Compare the system.

Use the schematic to filter the systems and their documents. Filtering does not add a system to your brief.

Supporting spaces
Schematic for navigation only. It is not a range design or an approved assembly.
See filtered systems ↓See the relevant documents ↓
Compare all six systems
Compare the documented product options, then confirm the assembly with the project professionals.
SystemArea / purposeDimensions / thicknessMaterial / finishInstallation & careDocuments
SHIELDTAC ricotileFloors, walls and ceilings; according to the component’s role in the system.500 × 500 × 40 mm; 1000 × 500 × 40 mm; 1000 × 500 × 43 mm; 500 × 500 × 60 mm; 500 × 500 × 70 mmPU-bonded rubber-granule tiles; red and black. Green and grey in 40 mm only.Use an even, load-bearing, permanently dry substrate. Wall and ceiling installations require suitable structural support and secure fixing.Data sheet Installation
SHIELDTAC ricotile FRFloor and envelope applications where reaction to fire must also be assessed.1000 × 500 × 43 mm43 mm rubber tile; red, green, grey and black.As for ricotile: prepare a dry, even substrate and coordinate fixing for the floor, wall or ceiling.Data sheet Installation
SHIELDTAC ricosys PUA flooring system with a closed, jointless surface.42 mm · 40 + 2 mm; 45 mm · 43 + 2 mm; 62 mm · 60 + 2 mmRicotile base with a matt PU coating; 8 surface colours and 9 separate line-marking colours.Fully bond the tile base, fill pores and apply Protector and Finisher layers in accordance with system instructions and curing intervals.Data sheet Installation
SHIELDTAC paversModular surfacing for suitable indoor or outdoor areas.Full · 200 × 165 × 43 mm; Half · 100 × 165 × 43 mm; Starter · 200 × 140 × 43 mmFull, half and starter units; red or black.Prepare a stable, even concrete or gravel substrate. Coordinate drainage outdoors; install in a staggered pattern and keep joints clean.Data sheet Installation
SHIELDTAC blocksComponents for a professionally designed target-area and bullet-trap assembly.500 × 300 × 200 mm; 250 × 300 × 200 mmRubber-granule blocks and half-blocks; red or black.Use a solid, stable base. Stagger joints between rows and layers; the assembly layout is determined by the professional design.Data sheet Installation
SHIELDTAC fragsafeA supplementary fragment-protection curtain; not a stopping rating for the original projectile.6 mm · width 1250 mm · roll 20 m; 8 mm · width 1250 mm · roll 15 m; 10 mm · width 1250 mm · roll 12 mMulticoloured rubber sheets; 6, 8 or 10 mm thick.A stable wall or ceiling and secure permanent fixing are required. Select fixings in accordance with the fixing and system manufacturers’ instructions.Data sheet Installation

02 / THE PRODUCT SYSTEM

Six families.
A clear purpose for each.

Filter by application area, then open the product details to compare dimensions, finishes and documents. This initial selection helps focus the discussion with your designer.

Choose by areaCompare all systems

6 product families

SHIELDTAC ricotile — official product image

Rubber tiles for floors and the range envelope

SHIELDTAC ricotile

Rubber tiles in a range of configurations for floors, walls and ceilings. Select the thickness and underside geometry to suit the component's role in the system and the relevant test configuration.

FloorWalls & ceilingsA range of thicknesses
Dimensions, colours & product documents

Material: PU-bonded rubber granules.

Configurations:

  • 500 × 500 × 40 mm
  • 1000 × 500 × 40 mm
  • 1000 × 500 × 43 mm
  • 500 × 500 × 60 mm
  • 500 × 500 × 70 mm

Colours: Red and black in all thicknesses; green and grey in 40 mm only.

Scope of the data: Test ranges depend on the thickness, configuration and report. They do not establish suitability for every shooting condition.

Official data sheet ↗Manufacturer instructions ↗
Installation & care in practice

Use an even, load-bearing, permanently dry substrate. Wall and ceiling installations require suitable structural support and secure fixing.

Coordinate cleaning and condition checks with the range procedures and the selected assembly.

Installation instructions
Preferences for the planning discussion

Preferences enter the brief only when you add this system. A thickness or colour choice is not a ballistic configuration approval.

Data sheet for these configurations
View project brief →
SHIELDTAC ricotile FR — official product image

Tiles with a Cfl-s1 reaction-to-fire classification

SHIELDTAC ricotile FR

A 43 mm variant combining rubber lining with a flooring reaction-to-fire classification. An option to assess where the facility also requires defined fire behaviour and acoustic performance.

43 mmCfl-s1Four material colours
Dimensions, colours & product documents

Material: PU-bonded rubber granules.

Configurations:

  • 1000 × 500 × 43 mm

Colours: Red / green / grey / black.

Scope of the data: Test ranges depend on the thickness, configuration and report. They do not establish suitability for every shooting condition.

Official data sheet ↗Manufacturer instructions ↗
Installation & care in practice

As for ricotile: prepare a dry, even substrate and coordinate fixing for the floor, wall or ceiling.

A reaction-to-fire classification does not replace a review of the planned assembly. Coordinate care with manufacturer instructions and range procedures.

Installation instructions
Preferences for the planning discussion

Preferences enter the brief only when you add this system. A thickness or colour choice is not a ballistic configuration approval.

Data sheet for these configurations
View project brief →
SHIELDTAC ricosys PU — official product image

A floor system with a matt PU finish

SHIELDTAC ricosys PU

A combined rubber-tile and polyurethane-coating system that creates a closed, seamless surface. The matt finish provides a clean appearance alongside dedicated shooting-range maintenance.

Closed floor surfaceMatt finish8 RAL colours
Dimensions, colours & product documents

Material: A polyurethane system over a rubber-tile base.

Configurations:

  • 42 mm — tile 40 mm with a coating of 2 mm
  • 45 mm — tile 43 mm with a coating of 2 mm
  • 62 mm — tile 60 mm with a coating of 2 mm

Colours: 8 RAL coating colours: 3020, 7005, 7035, 6011, 6021, 5009, 5014, 3003.

Scope of the data: Ballistic reports are specified separately for the 45 and 62 mm configurations. The scope of the reaction-to-fire classification for 62 mm requires manufacturer confirmation.

Official data sheet ↗Manufacturer instructions ↗
Installation & care in practice

Fully bond the tile base, fill pores and apply Protector and Finisher layers in accordance with system instructions and curing intervals.

Remove foreign objects before wet cleaning. Use a range-approved method and PU-suitable cleaning products; do not dry-sweep dust or use compressed air.

Installation instructions Cleaning & care
Preferences for the planning discussion

Preferences enter the brief only when you add this system. A thickness or colour choice is not a ballistic configuration approval.

Data sheet for these configurations
View project brief →
SHIELDTAC pavers — official product image

Modular flooring for indoor & outdoor use

SHIELDTAC pavers

Interlocking rubber units for functional and circulation areas in shooting ranges. Full, half and starter units are installed on a substrate designed for the intended use.

Indoor & outdoor43 mmFull / half / starter
Dimensions, colours & product documents

Material: PU-bonded rubber granules.

Configurations:

  • Full unit — 200 × 165 mm, thickness 43 mm
  • Half unit — 100 × 165 mm, thickness 43 mm
  • Starter unit — 200 × 140 mm, thickness 43 mm

Colours: Red / black.

Scope of the data: Test ranges depend on the thickness, configuration and report. They do not establish suitability for every shooting condition.

Official data sheet ↗Manufacturer instructions ↗
Installation & care in practice

Prepare a stable, even concrete or gravel substrate. Coordinate drainage outdoors; install in a staggered pattern and keep joints clean.

Review edge restraint and connection details against the site conditions and installation instructions.

Installation instructions
Preferences for the planning discussion

Preferences enter the brief only when you add this system. A thickness or colour choice is not a ballistic configuration approval.

Data sheet for these configurations
View project brief →
SHIELDTAC blocks — official product image

Protective components for the target area

SHIELDTAC blocks

Rubber blocks and half-blocks designed to form part of a professionally planned target-area protection system. Suitability depends on the construction, operating conditions and scope of the relevant report.

ModularTwo sizesTarget area
Dimensions, colours & product documents

Material: PU-bonded rubber granules.

Configurations:

  • 500 × 300 × 200 mm
  • 250 × 300 × 200 mm

Colours: Red / black.

Scope of the data: Test ranges depend on the thickness, configuration and report. They do not establish suitability for every shooting condition.

Official data sheet ↗Manufacturer instructions ↗
Installation & care in practice

Use a solid, stable base. Stagger joints between rows and layers; the assembly layout is determined by the professional design.

Check component condition and assembly details in accordance with the instructions and facility procedures.

Installation instructions
Preferences for the planning discussion

Preferences enter the brief only when you add this system. A thickness or colour choice is not a ballistic configuration approval.

Data sheet for these configurations
View project brief →
SHIELDTAC fragsafe — official product image

A supplementary fragment-protection curtain

SHIELDTAC fragsafe

Flexible rubber sheets providing supplementary protection against fragments and particles in the target area. The curtain is intended for fragment protection within the planned system configuration.

Fragment protection6/8/10 mmA supplementary component
Dimensions, colours & product documents

Material: PU-bonded rubber granules.

Configurations:

  • Thickness 6 mm; width 1250 mm; roll length 20 m
  • Thickness 8 mm; width 1250 mm; roll length 15 m
  • Thickness 10 mm; width 1250 mm; roll length 12 m

Colours: Multicoloured.

Scope of the data: The reported assessment concerns fragment protection. The energy of the original projectile is not a projectile-stopping rating for the curtain itself.

Official data sheet ↗Manufacturer instructions ↗
Installation & care in practice

A stable wall or ceiling and secure permanent fixing are required. Select fixings in accordance with the fixing and system manufacturers’ instructions.

Coordinate access for inspection of the sheets and fixing system during use.

Installation instructions
Preferences for the planning discussion

Preferences enter the brief only when you add this system. A thickness or colour choice is not a ballistic configuration approval.

Data sheet for these configurations
View project brief →

SUPPORTING SPACES

And the spaces around it.

For shooter-standing, supervision and guidance areas, the manufacturer also offers the SPORTEC color ranges, including black color0, color FR and giga. These are complementary flooring solutions to be matched to the area's intended use.

The ballistic test results for SHIELDTAC systems must not be attributed to this complementary flooring.

SPORTEC color — official material sample

SPORTEC color

Granular rubber flooring in a choice of material colours for standing, supervision and guidance areas. Thicknesses of 4–12 mm; 12 mm is available in grey only.

Complementary flooring; not ballistic lining.

Technical data ↗
SPORTEC color FR — official material sample

SPORTEC color FR

Complementary flooring with a Cfl-s1 classification, in thicknesses of 4–10 mm and grey, blue and black-asphalt colours.

Complementary flooring; not ballistic lining.

Technical data ↗
SPORTEC giga — official material sample

SPORTEC giga

Flooring with large coloured granules, in thicknesses of 6–10 mm, for standing and guidance areas requiring a distinctive finish.

Complementary flooring; not ballistic lining.

Technical data ↗

Explore the supporting spaces

Sports flooring and Gymcoustic assemblies serve different use cases. Review them separately from the shooting-range system.

SPORTEC flooring & applications →Gymcoustic systems →

Official SPORTEC giga film

A product film about complementary sports flooring. It does not demonstrate ballistic protection.

Watch the manufacturer film ↗Manufacturer video & document library ↗
Rubber wall lining and flooring in a shooting range, from the manufacturer's photographs

ONE COHERENT ENVIRONMENT

The floor. The wall.
The connection between them.

Quality installation begins at the interfaces: a suitable substrate, a continuous finish where required, carefully detailed floor-to-wall transitions and access for maintenance.

What to consider during planning →

03 / MATERIAL & COLOUR

Material, colour and finish.
Defined by the system you choose.

The material colours of rubber tiles and the colour of a PU finish are different options. Screen colours are illustrative; the final shade should be approved against a physical sample.

ricosys PUMouse GreyRAL 7005

Illustrative surface colour
Not a material sample or an application photograph

Eight standard RAL colours for ricosys PU

Additional colours are subject to manufacturer enquiry. Nine line-marking colours are also available and are selected separately from the surface colour.

Explicitly adds the system and a colour preference for the planning discussion. Confirm the shade against a physical sample.

Line marking · a separate palette

GLP-MW — nine line-marking colours for indoor systems, subject to professional specification.

RAL 9010Pure WhiteRAL 1023Traffic YellowRAL 2004Pure OrangeRAL 3020Traffic RedRAL 5009Azure BlueRAL 5012Light BlueRAL 6002Leaf GreenRAL 7001Silver GreyRAL 9005Jet Black

Colours by product family

ricotile: Red and black in all thicknesses; green and grey in 40 mm only.

ricotile FR: Red, green, grey and black.

pavers & blocks: Red and black. fragsafe: Multicoloured rubber granules.

The material colours are not the RAL colours of the PU coating. Final availability and colour matching should be checked against a sample.

Surface & line-marking colour chart PDF ↗Complementary SPORTEC flooring colours PDF ↗

04 / EVIDENCE & PERFORMANCE

Data to inform
a professional planning discussion.

Reaction to fire, emissions, slip resistance and acoustics relate to the product and configuration tested. The following highlights provide a starting point; the full document is the basis for verifying the specification.

SystemReaction to fireVOC emissionsAdditional characteristic & test conditions
SHIELDTAC ricotileEflA+ according to the manufacturer's data sheetαw 0.75: 40 mm tile, 50 mm from the wall, with the profiled side facing the room.
SHIELDTAC ricotile FRCfl-s1A+ according to the manufacturer's data sheetαw 0.60: 43 mm tile, 50 mm from the wall.
SHIELDTAC ricosys PUBfl-s1A+ according to the manufacturer's data sheetMatt finish; 20 dB for the 45 mm assembly. The reaction-to-fire classification for 62 mm requires verification.
SHIELDTAC paversEflA+ according to the manufacturer's data sheetR10 according to DIN EN16165; modular units.
SHIELDTAC blocksEflA+ according to the manufacturer's data sheetαw 0.75: 200 mm-deep block, with no wall gap; for the tested assembly only.
SHIELDTAC fragsafeNot statedA+ according to the manufacturer's data sheetFragment protection only; no reaction-to-fire classification is specified in the data sheet.
A

Ballistic testing is configuration-specific

Verify the report for the model, thickness, system build-up and project conditions. An energy range in a report is not a blanket approval for every type of ammunition or installation.

View the test map by model ↓
B

Acoustics: understand what was measured

Sound absorption αw and impact sound reduction ΔLw are different measures. Neither alone establishes the sound insulation of the complete range or the noise level outside the building.

C

Reaction to fire depends on the product and assembly

For example, Bfl-s1 is shown for a particular ricosys PU configuration; Cfl-s1 for ricotile FR. The fl suffix denotes a flooring classification. It must not be applied to a wall or ceiling, or transferred between configurations, without the relevant document.

Test map & conditions — by model

The following tests are reported in the manufacturer's September 2026 data sheets. The full reports and test set-ups are not reproduced here; they can be requested from the manufacturer to verify the specification.

  • ricotile 40 mm: Report B-31/2009 under the German shooting-range guidelines: 200–10,000 J; report 26M007A01 under Bundeswehr instructions: 400–3,500 J; expert assessment 211/2025 for fragment and ricochet protection: 600–7,000 J.
  • ricotile 43 mm: HTBLVA Ferlach report 201325, based on VPAM ARG3 and customer specifications: 200–7,000 J. Expert assessment 211/2025: 600–7,000 J.
  • ricotile 60 mm: This configuration appears in the data sheet. A separate ballistic report for the 60 mm tile is not specified there.
  • ricotile 70 mm: Munich Proof House report 26M006A01 under Bundeswehr instructions: 400–3,500 J.
  • ricotile FR 43 mm: HTBLVA Ferlach report 201325, based on VPAM ARG3 and customer specifications: 200–7,000 J.
  • ricosys PU 45 mm (43+2): HTBLVA Ferlach reports 200925, 201025, 201125 and 201225: 200–7,000 J. The extended scope includes a 10° impact angle and additional lead-free projectiles.
  • ricosys PU 62 mm (60+2): Munich Proof House report 26M005A01: 400–3,500 J.
  • pavers 43 mm: Munich Proof House report 25M014A01 under Bundeswehr instructions: 400–3,500 J.
  • blocks: Expert assessment 210/2025: 200–7,000 J; report 26M008A01 in a manufacturer-specific test set-up: 400–3,500 J. TNO is mentioned without a report number or full scope.
  • fragsafe: Expert assessment 212/2025: protection from fragments generated by projectiles in the 200–7,000 J range. This is not a stopping rating for a complete projectile.

Some general overviews state wider ranges. For a specification, verify the exact report, variant and operating conditions. These ranges must not be presented as a uniform approval for the entire product family.

The manufacturer's documents list a German general building-inspection approval application with an expected date in 2027, and a reaction-to-fire classification for the 60+2 mm ricosys PU configuration planned for 2027. These are not current approvals. Full test reports and certificates are required to verify the specification with the manufacturer.

Sources: manufacturer's September 2026 data sheets; the SHIELDTAC brochure; the test matrix on the KRAIBURG Relastec website. View the official sources ↘

05 / DESIGN, INSTALL, MAINTAIN

Quality is built
between the layers, too.

Product selection is part of professional shooting-range design. Review the building conditions, manufacturer documents, installation details and maintenance requirements together.

ricosys PU system section: rubber tile, pore sealer and PU layers
Illustration of the ricosys PU system build-up · manufacturer illustration

ricosys PU: a seamless finish over ricotile tiles

  1. BaseSHIELDTAC ricotile tiles on an approved substrate.
  2. Pore FillerFilling and sealing pores in the rubber base.
  3. ProtectorA self-levelling PU layer; where required, an additional thin Protector scratch coat to close pores, in accordance with the system instructions.
  4. FinisherFinish coat. Line marking and skirting details to suit the design.

Quantities, recoat intervals and substrate preparation are determined by the applicable installation instructions and project requirements.

01 / DEFINE

Use & environmental conditions

Indoor or outdoor range, shooting and supporting areas, surface areas and quantities, circulation conditions and operational requirements.

02 / VERIFY

System & documents

The selected model and configuration, the relevant test report, reaction-to-fire and acoustic data, and the requirements of the approving professional.

03 / COORDINATE

Substrate & installation details

Substrate condition, moisture and flatness, perimeter details, interfaces, compatible adhesives and sealants, and installation instructions.

04 / MAINTAIN

Cleaning & maintenance

Product-specific cleaning instructions, periodic condition checks, and repair or replacement in accordance with the manufacturer's instructions and range operating procedures.

System accessories & support

The manufacturer offers pore fillers, Protector and Finisher for the PU system, line-marking paint, skirting components and a repair kit. Adhesives, sealants and cleaning products are selected to suit the system and its instructions.

Range cleaning requires a dedicated procedure

Follow the manufacturer's instructions and the facility's safety and hygiene procedures, including the handling of dust and shooting residues. Chemical resistance and vehicle traffic suitability for the PU system require specific enquiry.

REAL WORLD APPLICATIONS

See the material
within the space.

Applications from the manufacturer's gallery. The photographs are not presented as projects installed by EUROTEC.

Seamless floor system · ricosys PU — application photograph from the manufacturer's gallery
Seamless floor system · ricosys PU
Wall lining · ricotile — application photograph from the manufacturer's gallery
Wall lining · ricotile
PU floor and wall lining · combined systems — application photograph from the manufacturer's gallery
PU floor and wall lining · combined systems
Training centre · ricosys PU — application photograph from the manufacturer's gallery
Training centre · ricosys PU
Grey floor finish · ricosys PU — application photograph from the manufacturer's gallery
Grey floor finish · ricosys PU
Lining details · ricotile — application photograph from the manufacturer's gallery
Lining details · ricotile

06 / TECHNICAL LIBRARY

Every document.
In the right place.

Brochures, product data, installation, cleaning and colour information. Manufacturer documents are provided in their original languages, mainly English; the filename and document type are shown before opening.

SHIELDTAC — EUROTEC catalogue in Hebrew24 pages · systems, colours and manufacturer documents
PDF · 4.5MB ↗
SHIELDTAC ricotile — data sheetdata-sheet-shieldtac-ricotile-197.pdf
PDF · 622KB ↗
ricotile / ricotile FR — installation instructionsinstallation-instruction-shieldtac-ricotile-197.pdf
PDF · 822KB ↗
SHIELDTAC ricotile FR — data sheetdata-sheet-shieldtac-ricotile-fr-202.pdf
PDF · 544KB ↗
SHIELDTAC ricosys PU — data sheetdata-sheet-shieldtac-ricosys-pu-203.pdf
PDF · 471KB ↗
SHIELDTAC ricosys PU — installation instructionsinstallation-instruction-shieldtac-ricosys-pu-203.pdf
PDF · 638KB ↗
SHIELDTAC ricosys PU — cleaning & carecleaning-and-care-recommendation-shieldtac-ricosys-pu-203.pdf
PDF · 386KB ↗
SHIELDTAC pavers — data sheetdata-sheet-shieldtac-pavers-208.pdf
PDF · 469KB ↗
SHIELDTAC pavers — installation instructionsinstallation-instruction-shieldtac-pavers-208.pdf
PDF · 790KB ↗
SHIELDTAC blocks — data sheetdata-sheet-shieldtac-blocks-205.pdf
PDF · 513KB ↗
SHIELDTAC blocks — installation instructionsinstallation-instruction-shieldtac-blocks-205.pdf
PDF · 864KB ↗
SHIELDTAC fragsafe — data sheetdata-sheet-shieldtac-fragsafe-207.pdf
PDF · 472KB ↗
SHIELDTAC fragsafe — installation instructionsinstallation-instruction-shieldtac-fragsafe-207.pdf
PDF · 487KB ↗
SHIELDTAC — surface & line-marking RAL coloursSurface-RAL-colours.pdf
PDF · 156KB ↗
SHIELDTAC — benefits at a glanceSHIELDTAC_usp_flyer_EN.pdf
PDF · 124KB ↗
SPORTEC color — data sheetdata-sheet-sportec-color-1.pdf
PDF · 1.4MB ↗
SPORTEC color / color FR / giga — installation instructionsinstallation-instruction-sportec-color-1.pdf
PDF · 971KB ↗
SPORTEC color / color FR / giga — cleaning & carecleaning-and-care-instruction-sportec-color-1.pdf
PDF · 515KB ↗
SPORTEC color FR — data sheetdata-sheet-sportec-color-fr-179.pdf
PDF · 1.3MB ↗
SPORTEC giga — data sheetdata-sheet-sportec-giga-77.pdf
PDF · 1.4MB ↗
SPORTEC — material colour chartSPORTEC_colours_latest.pdf
PDF · 1.5MB ↗
RZ TURBO PROTECT ZERO — sealing-system instructionsinstallation-instruction-sportec-rz-turbo-protect-zero-196.pdf
PDF · 2.8MB ↗
SHIELDTAC — product brochureSHIELDTAC_EN_latest.pdf
PDF · 2.6MB ↗
ricotile — IBU Environmental Product DeclarationEPD-KRA-20250471-IBC1-EN.pdfAn environmental declaration, not a ballistic test. Consult the product list and thickness scope.
PDF · 1.5MB ↗
ricotile — EPD product appendixEPD-Group-1-Appendix-A.pdfAn environmental declaration, not a ballistic test. Consult the product list and thickness scope.
PDF · 444KB ↗
KRAIBURG Relastec — ISO9001:2015 quality-management certificateISO_9001_2024_D.pdfManufacturer quality-management certificate; stated validity until 12.03.2027. It is not a ballistic product approval.
PDF · 753KB ↗

COMMON QUESTIONS

Questions that help
refine the selection.

How are SHIELDTAC and SPORTEC related?

SHIELDTAC is KRAIBURG Relastec's dedicated brand for rubber shooting-range systems. Some products were previously named SPORTEC shooting, shooting FR or shooting SFR. SPORTEC color, color FR and giga provide complementary flooring for the appropriate areas.

What is the difference between ricotile and ricosys PU?

ricotile is a rubber tile. ricosys PU is a system of ricotile tiles with pore-filling and PU coating layers that create a seamless finish. The total system thickness, classifications and test conditions differ from those of the tile alone.

Can every product be supplied in any colour?

No. Rubber-tile colours depend on the product and thickness. The surface RAL colours refer to the ricosys PU finish; line-marking colours are selected separately. Final availability and special colours are confirmed when ordering.

Is a ballistic test sufficient to approve a shooting range?

Not on its own. A test report relates to the product and configuration tested. Design and approval of the complete facility require compliance with project requirements, review by the relevant qualified professionals and examination of the full documents.

Do the acoustic figures guarantee low noise outside the range?

No. Room sound absorption and impact sound reduction do not, on their own, establish the sound insulation of the building envelope. Overall insulation, openings, ventilation and sound-transmission paths must be assessed in the facility's acoustic design.

Can part of the system be repaired or replaced?

The manufacturer describes replacement of damaged tiles and a repair kit for the PU system. The repair method, finish colour, working time and return to use should be checked against the system's condition and the manufacturer's instructions.

What should I bring to a planning discussion?

Plans and dimensions, intended use, indoor or outdoor conditions, the areas required, substrate information, fire and acoustic requirements, the designer's documents and a schedule. You can prepare an initial brief here and share it with the EUROTEC team.

07 / YOUR PROJECT

Start with the requirements.
Develop the right specification.

Tell us about the facility and the areas to be addressed. We will bring the information together, review the appropriate system and required documents, and help move the project forward.

Contact the EUROTEC team →077-500-0000

The final specification is established following professional review and confirmation of the manufacturer's documents for the project.

A short brief for the planning discussion

This tool prepares text for you to copy or download on your device. It does not send an enquiry.

Your choices for the planning discussion

No systems or colour preference added yet.

    Choose systems →
    Which areas are part of the project?

    Professional sources

    The information is based on SHIELDTAC and KRAIBURG Relastec documents and official product pages. For design and installation, verify the current issue and configuration, and request the full test report required for the project.

    SHIELDTAC — manufacturer website ↗Official download library ↗KRAIBURG Relastec ↗

    Trademarks belong to their respective owners. Product images, illustrations and application photographs: KRAIBURG Relastec.